THP168FG-T3D
Trenton Refrigeration THP high profile evaporator.
Specifications
Note:for some values below, the manufacturer's own documents disagree. Both figures are shown with their source. CrossRefHVAC is confirming the correct values with the manufacturer.
| Specification | Value | Conditions | Source |
|---|---|---|---|
| fan qty | 4 count | p.36 ✓ | |
| capacity | 145000 btu_h | evap temp f: 0; refrigerant: CO2 | p.36 |
| 140900 btu_h | evap temp f: 10; refrigerant: CO2 | p.36 | |
| 136800 btu_h | evap temp f: 20; refrigerant: CO2 | p.36 ✓ | |
| 124500 btu_h | evap temp f: 30; refrigerant: CO2 | p.36 | |
| 116300 btu_h | evap temp f: 40; refrigerant: CO2 | p.36 ✓ | |
| airflow | 24800 cfm | p.36 | |
| 11700 l_s | p.36 | ||
| refrigerant charge | 38.2 lb | refrigerant: CO2 | p.36 |
| 17.3 kg | refrigerant: CO2 | p.36 | |
| awef rating | 4.15 ratio | refrigerant: CO2 | p.41 ✓ |
| suction od | 1 1/8 inches | p.45 | |
| distributor inlet | 1 3/8 inches | defrost piping: reverse_cycle | p.45 |
| liquid line od | 0.875 inches | defrost piping: reverse_cycle | p.45 |
| side port connection | 0.875 inches | p.45 | |
| hot gas connection | 1 1/8 inches | p.45 | |
| motor hp | 1 hp | p.39 | |
| motor fla | 20 amps | p.39 | |
| total watts | 2240 wattssources differ | THP p.39 | |
| 13650 wattssources differ | THP p.39 | ||
| mca | 25 ampssources differ | THP p.39 | |
| 42.8 ampssources differ | THP p.39 | ||
| mop | 30 amps | p.39 | |
| total amps | 34.3 amps | p.39 | |
| drain pan heaters 208 230 3 60 2 spd ecm std mop a | 45 | p.39 | |
| voltage | 208 V | p.? | |
| phase | 3 ph | p.? | |
| frequency | 60 Hz | p.? |
Sources: . Extraction with per-cell provenance. Verify before purchase. Variants from distributor API snapshot.
Orderable variants (1)
| Variant | Voltage | Availability |
|---|---|---|
| THP168FG-T3D | 208-230/3/60 | Check availability |
Nomenclature
| Position / meaning | Value |
|---|---|
| capacity code | 168 |
| capacity mbh | 168 |
| defrost | G |
| generation suffix | D |
| temp class | F |
| voltage | T3 |
Cross references
| Brand | Equivalent model | Basis |
|---|---|---|
| KeepRite | KHP168FG-T3D | shared catalog stem ✓ |
| Bally | BHP168FG-T3D | shared catalog stem ✓ |
In progress: cross-brand replacements by specification matching.
Frequently asked questions
What is the capacity of THP168FG-T3D?
THP168FG-T3D has a rated capacity of 145000 btu_h. See the specifications table for rating conditions.
What voltage does THP168FG-T3D require?
THP168FG-T3D runs on 208 V supply power.
Related models in THP
Independent reference. Not affiliated with any manufacturer. Verify specifications against manufacturer documentation before purchase.