TEP088ME-T4D

Name: TEP088ME-T4D
Brand: Trenton Refrigeration

Trenton Refrigeration TEP evaporator.

Specifications

Note:for some values below, the manufacturer's own documents disagree. Both figures are shown with their source. CrossRefHVAC is confirming the correct values with the manufacturer.

Specification	Value	Conditions	Source
fan qty	3 count		TEP + TEP-GEN-E p.4 ✓
capacity	87700 btu_h	evap temp f: 25; refrigerant: R407A/R407C/R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	86800 btu_h	evap temp f: 15; refrigerant: R407A/R407C/R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	85900 btu_h	evap temp f: 10; refrigerant: R407A/R407C/R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	71300 btu_h	evap temp f: 25; refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	70600 btu_h	evap temp f: 15; refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	69900 btu_h	evap temp f: 10; refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	87700 btu_h	evap temp f: 25; refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	86800 btu_h	evap temp f: 15; refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	85900 btu_h	evap temp f: 10; refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
airflow	11200 cfm		TEP + TEP-GEN-E p.4 ✓
	5290 l_s		TEP + TEP-GEN-E p.4 ✓
refrigerant charge	13.9 lb	refrigerant: R407A/R407C	TEP + TEP-GEN-E p.4 ✓
	6.3 kg	refrigerant: R407A/R407C	TEP + TEP-GEN-E p.4 ✓
	13.1 lb	refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	6 kg	refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	12.6 lb	refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	5.7 kg	refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	13.3 lb	refrigerant: R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	6 kg	refrigerant: R448A/R449A	TEP + TEP-GEN-E p.4 ✓
awef rating	9 ratio	refrigerant: R404A/R507	p.35 ✓
	9 ratio	refrigerant: R407A/R407C	p.35
	9 ratio	refrigerant: R448A/R449A	p.35
	9 ratio	refrigerant: R454A	p.35
	9 ratio	refrigerant: R454C	p.35
	9 ratio	refrigerant: R455A	p.35
	9 ratio		p.33
suction od	1 5/8 inches		TEP + TEP-GEN-E p.37 ✓
distributor inlet	1 1/8 inchessources differ		TEP p.37
	1 1/8 inchessources differ		TEP-GEN-E p.35
	1 3/8 inchessources differ		TEP-GEN-E p.36
	1 3/8 inches	defrost piping: reverse_cycle_3_pipe	p.37
side port connection	0.875 inches	defrost piping: reverse_cycle_3_pipe	p.37
	0.875 inches		p.36
hot gas connection	1 1/8 inches		p.37
shipping weight	455 lb		TEP + TEP-GEN-E p.38 ✓
	207 kg		TEP + TEP-GEN-E p.38 ✓
motor hp	1 hp		p.10
motor fla	7.5 amps		p.10
total watts	1050 wattssources differ		TEP p.10
	12940 wattssources differ		TEP p.10
mca	15 ampssources differ		TEP p.10
	21.3 ampssources differ		TEP p.10
mop	20 amps		p.10
total amps	17.1 amps		p.10
defrost heaters 460 3 60 mop a	25		p.10
esp circuit 460 3 60 mop a	25		p.13
voltage 208 230 1 60	460/3/60		p.62
1 x evaporator defrost kit dfk 10	DFK-14		p.62
1 x evaporator fuse package fp 105	FP-112		p.62
2 x evaporator defrost kit dfk 12	DFK-18		p.62
2 x evaporator fuse package fp 118	FP-123		p.62
voltage	460 V		TEP + TEP-GEN-E p.? ✓
phase	3 ph		TEP + TEP-GEN-E p.? ✓
frequency	60 Hz		TEP + TEP-GEN-E p.? ✓
r454a erte 5 c	EBSTE-15-C	refrigerant: R404A/R407A/R448A/R449A/R454A/R454C/R455A/R507	p.40
r454c r455a r407a r448a r449a erve 5 c	EBSVE-15-C	refrigerant: R404A/R407A/R448A/R449A/R454A/R454C/R455A/R507	p.40
r404a r507 erse 3 1 2 c erse 4 c	EBSSE-13-C	refrigerant: R404A/R407A/R448A/R449A/R454A/R454C/R455A/R507	p.40
liquid line od	15.9 mm		p.51
suction line od	41.3 mm		p.51
maximum line length 3m minimum room area m2	17		p.51
maximum line length 7 6m	22		p.51
maximum line length 15 2m	30		p.51
maximum line length 30 5m	45		p.51

Sources:

, . Extraction with per-cell provenance. Verify before purchase. Variants from distributor API snapshot.

Orderable variants (1)

Variant	Voltage	Availability
TEP088ME-T4D	460/3/60	Check availability

Nomenclature

Position / meaning	Value
capacity code	088
capacity mbh	88
defrost	E
generation suffix	D
temp class	M
voltage	T4

Parts

7 factory parts for this unit: 7from the manufacturer's selection documents, 0 from Trenton service parts records. Prices are manufacturer list.

Expansion and refrigerant circuit

Where several valves of one kind are listed, they are the manufacturer's selection options: which one a unit carries depends on the operating conditions shown. The service parts rows show what a documented build was actually fitted with.

Part	Part number	Description	Qty	List	Availability
Distributor nozzle	E10✓	Distributor nozzle; Distributor nozzle, Sporlan (Parker Hannifin)	-	-	Check availability
Electronic expansion valve	E3V55order as E3V55BWRC1✓	Electronic expansion valve (EEV), Carel	-	-	Check availability
Safety check valve	CSOV17order as CSOV-17S✓	Safety check valve, Sporlan (Parker Hannifin)	-	-	Check availability
Safety shutoff solenoid	SSOV19✓	Safety shutoff solenoid valve, Sporlan (Parker Hannifin)	-	-	Check availability
Solenoid valve	B14order as B14S2-5/8ODF✓	Solenoid valve, Sporlan (Parker Hannifin)	-	-	Check availability
TXV	EBSSE-13-C✓	refrigerant: R404A/R507	-	-	Check availability
TXV	EBSVE-15-C✓	refrigerant: R407A/R407C/R448A/R449A	-	-	Check availability

Sources: manufacturer selection documents (page-cited) and Trenton service parts records. NLA: no longer available from the manufacturer. Verify before purchase.

Cross references

Brand	Equivalent model	Basis
KeepRite	KEP088ME-T4D	shared catalog stem ✓
Bally	BEP088ME-T4D	shared catalog stem ✓

In progress: cross-brand replacements by specification matching.

Frequently asked questions

What is the capacity of TEP088ME-T4D?

TEP088ME-T4D has a rated capacity of 87700 btu_h. See the specifications table for rating conditions.

What voltage does TEP088ME-T4D require?

TEP088ME-T4D runs on 460 V supply power.

Related models in TEP

Independent reference. Not affiliated with any manufacturer. Verify specifications against manufacturer documentation before purchase.