TEP051ME-S2E

Name: TEP051ME-S2E
Brand: Trenton Refrigeration

Trenton Refrigeration TEP evaporator.

Specifications

Note:for some values below, the manufacturer's own documents disagree. Both figures are shown with their source. CrossRefHVAC is confirming the correct values with the manufacturer.

Specification	Value	Conditions	Source
fan qty	2 count		TEP + TEP-GEN-E p.4 ✓
capacity	51200 btu_h	evap temp f: 25; refrigerant: R407A/R407C/R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	50700 btu_h	evap temp f: 15; refrigerant: R407A/R407C/R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	50200 btu_h	evap temp f: 10; refrigerant: R407A/R407C/R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	41600 btu_h	evap temp f: 25; refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	41200 btu_h	evap temp f: 15; refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	40800 btu_h	evap temp f: 10; refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	51200 btu_h	evap temp f: 25; refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	50700 btu_h	evap temp f: 15; refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	50200 btu_h	evap temp f: 10; refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
airflow	7900 cfm		TEP + TEP-GEN-E p.4 ✓
	3730 l_s		TEP + TEP-GEN-E p.4 ✓
refrigerant charge	8 lb	refrigerant: R407A/R407C	TEP + TEP-GEN-E p.4 ✓
	3.6 kg	refrigerant: R407A/R407C	TEP + TEP-GEN-E p.4 ✓
	7.6 lb	refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	3.4 kg	refrigerant: R404A/R507	TEP + TEP-GEN-E p.4 ✓
	7.2 lb	refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	3.3 kg	refrigerant: R454A/R454C/R455A	TEP + TEP-GEN-E p.4 ✓
	7.7 lb	refrigerant: R448A/R449A	TEP + TEP-GEN-E p.4 ✓
	3.5 kg	refrigerant: R448A/R449A	TEP + TEP-GEN-E p.4 ✓
awef rating	9 ratio	refrigerant: R404A/R507	p.35 ✓
	9 ratio	refrigerant: R407A/R407C	p.35
	9 ratio	refrigerant: R448A/R449A	p.35
	9 ratio	refrigerant: R454A	p.35
	9 ratio	refrigerant: R454C	p.35
	9 ratio	refrigerant: R455A	p.35
	9 ratio		p.33
suction od	1 1/8 inches		TEP + TEP-GEN-E p.37 ✓
distributor inlet	0.875 inches		TEP + TEP-GEN-E p.37 ✓
	0.875 inches	defrost piping: reverse_cycle_3_pipe	p.37
side port connection	0.5 inches	defrost piping: reverse_cycle_3_pipe	p.37
	0.5 inches		p.36
hot gas connection	0.875 inches		p.37
shipping weight	315 lb		TEP + TEP-GEN-E p.38 ✓
	143 kg		TEP + TEP-GEN-E p.38 ✓
mca	48 ampssources differ		TEP p.12
	NA ampssources differ		TEP p.12
	16 ampssources differ		TEP-GEN-E p.11
	48 ampssources differ		TEP-GEN-E p.11
	NA ampssources differ		TEP-GEN-E p.11
esp circuit 1 208 230 1 60 mop a	50		p.12
esp circuit 2 208 230 1 60 mop a	NA		p.12
voltage	208 V		TEP + TEP-GEN-E p.? ✓
phase	1 ph		TEP + TEP-GEN-E p.? ✓
frequency	60 Hz		TEP + TEP-GEN-E p.? ✓
r454a erte 5 c	ERTE-8-C	refrigerant: R404A/R407A/R448A/R449A/R454A/R454C/R455A/R507	p.40
r454c r455a r407a r448a r449a erve 5 c	ERVE-8-C	refrigerant: R404A/R407A/R448A/R449A/R454A/R454C/R455A/R507	p.40
r404a r507 erse 3 1 2 c erse 4 c	EBSSE-6-C	refrigerant: R404A/R407A/R448A/R449A/R454A/R454C/R455A/R507	p.40
liquid line od	9.5 mm		p.51
suction line od	28.6 mm		p.51
maximum line length 3m minimum room area m2	10		p.51
maximum line length 7 6m	12		p.51
maximum line length 15 2m	16		p.51
maximum line length 30 5m	24		p.51
motor hp	0.5 hp		p.11
motor fla	8.4 amps		p.11
motor watts	700 watts		p.11
mop	20 amps		p.11
total watts	8837 wattssources differ		TEP-GEN-E p.11
	NA wattssources differ		TEP-GEN-E p.11
total amps	38.4 ampssources differ		TEP-GEN-E p.11
	NA ampssources differ		TEP-GEN-E p.11
defrost heaters 208 230 1 60 circuit 1 mop a	50		p.11
defrost heaters 208 230 1 60 circuit 2 mop a	NA		p.11

Sources:

, . Extraction with per-cell provenance. Verify before purchase. Variants from distributor API snapshot.

Orderable variants (1)

Variant	Voltage	Availability
TEP051ME-S2E	208-230/1/60	Check availability

Nomenclature

Position / meaning	Value
capacity code	051
capacity mbh	51
defrost	E
generation suffix	E
temp class	M
voltage	S2

Parts

7 factory parts for this unit: 7from the manufacturer's selection documents, 0 from Trenton service parts records. Prices are manufacturer list.

Expansion and refrigerant circuit

Where several valves of one kind are listed, they are the manufacturer's selection options: which one a unit carries depends on the operating conditions shown. The service parts rows show what a documented build was actually fitted with.

Part	Part number	Description	Qty	List	Availability
Distributor nozzle	G4✓	Distributor nozzle; Distributor nozzle, Sporlan (Parker Hannifin)	-	-	Check availability
Electronic expansion valve	E3V45order as E3V45BWRC1✓	Electronic expansion valve (EEV), Carel	-	-	Check availability
Safety check valve	CSOV13order as CSOV-13S✓	Safety check valve, Sporlan (Parker Hannifin)	-	-	Check availability
Safety shutoff solenoid	SSOV10✓	Safety shutoff solenoid valve, Sporlan (Parker Hannifin)	-	-	Check availability
Solenoid valve	B9order as B9S2✓	Solenoid valve, Sporlan (Parker Hannifin)	-	-	Check availability
TXV	EBSSE-6-C✓	refrigerant: R404A/R507	-	-	Check availability
TXV	ERVE-8-C✓	refrigerant: R407A/R407C/R448A/R449A	-	-	Check availability

Sources: manufacturer selection documents (page-cited) and Trenton service parts records. NLA: no longer available from the manufacturer. Verify before purchase.

Cross references

Brand	Equivalent model	Basis
KeepRite	KEP051ME-S2E	shared catalog stem ✓
Bally	BEP051ME-S2E	shared catalog stem ✓

In progress: cross-brand replacements by specification matching.

Frequently asked questions

What is the capacity of TEP051ME-S2E?

TEP051ME-S2E has a rated capacity of 51200 btu_h. See the specifications table for rating conditions.

What voltage does TEP051ME-S2E require?

TEP051ME-S2E runs on 208 V supply power.

Related models in TEP

Independent reference. Not affiliated with any manufacturer. Verify specifications against manufacturer documentation before purchase.